Lino printing, mono-prints and riso-printing


Mono-print workshop
By using tools like pencils, metal fragments and plastic cutlery i was able to depict imagery within each of my mono-prints. To do this I would ink the plate as usual, but when i put the paper over the plate i would use the designated tool and make my expressive marks within the perimeter of the plate. For best definition on the prints i would not smooth the paper down or apply the normal pressure across the whole surface until i did ghost prints. 


The green prints above are one of my favourite outcomes as i like the style of the face i did most as it is most personal, unlike some of the other ones where i am choosing to depict a style i view closer to Frank Auerach. I also think the marks and variation in ink thickness is a really interesting surface. 

On the two plates above i have used too much ink meaning the outcome prints did not show the intended details clearly and most lines were lost to where the excess ink spread across to. 
In terms of method these prints probably worked the best as i put very little ink of the plate meaning the intended definition was very clear and in one case mean only the scratched line transferred to the paper. Nevertheless, some overall more ink could be useful to be able to provide a deeper sense of vibrance achieved during the green prints. Furthermore, the third print (single eye) was a second ghost print, but because there was so little ink on the plate i was able to engrave a new design onto the paper which was detected rather then the original as i smoothed the whole paper onto the plate meaning the thin gaps were filled in by the left over ink moving.

Lino Prints 
Process of design and cutting out


I really like the prints where they are stacked together in fours as it mimics that of old wanted posters, particularly when in black ink and off white paper. Nevertheless, I think the red and black combo is very visually strong. I also really like this character of 'Eggo' as it shows a distinct character design which i personally believe holds a stubborn and individualistic personality. 


I think my surfing skeletons are my favourite out of my skeletal series of lino designs. This is because the composition is simply but very strong, as well as performing to an established characteristic within the piece of fun whilst having an edge to the piece.
I really love this shadow skeleton print, both in its duo colour stage and its finale of the white overlay. The faint grainy appearing texture and the light mahogany  shadow reminds me of old film green-screens. 

for my pool prints, I made them with the consideration of the risoprinting process of printing the primary part of the piece followed by the secondary.  However, I wanted  to stick to using only one bit of lino, so i did my prints in stages with tones. 

Finished prints. I chose to do some in various colours to explore with which worked best to convey water and a poolside. I think the lighter one worked best, but i do prefer the darker hues mixed. Furthermore, the lighter coloured prints remind me of David Hockney's style for his painting 'Pool with two figures'

Below are some edits of the pool prints. For one I played around with the curve on Adobe lightroom in order to provide this brighter and alternative colour based print. Whereas on the second image, I intensified the saturation and brightness of the original colours, providing a deeper, more intense blue.

Here are some of my prints i did for my sporting skeleton series, focusing on tennis this time. As i could not put as much detail into each skeleton as i could on the surfing one, I found it difficult to feel as if the piece was complete/not lacking. However, rather then drawing a standard tennis ball, I thought it would be effective and lightly ironic to have a heart there instead. 
I believe this print worked very effectively, not just because of the colour and cleanness of the line, but the granular texture works really well across the pitch and reminds me of the all the small bits of Astroturf that are spread across. 

As I continued to print, i found it harder to get clean lines on the details of the skeletons, and the heart despite cleaning the lino. So i decided the try dual prints which might also provide some depth to the piece. Whilst none of them turned out as cleanly as my shadowed surfing skeleton one did, I do still like the outcome as the piece appears to hold momentum, particularly the heart. Additionally, I think the orange and black one worked really well for the orange being the base colour and the black adding detail, like a risoprint.

Here is a print made after washing the lino and not drying it enough. I really like the texture this provides and like that the movement of the water has printed onto the piece, even if it doesn't fit with the tennis theme. 

I  edited the dual print piece in order to see if it would be any more effective in a different colour range. Overall I think the first image (most similar to the original print) was the most effective and has the most noticeable colour duality. Nevertheless, I do also like the blue and purple one (last image) as it looks very vivid and energetic, and works really well with the further away skeleton.

Comments